01What are DMA cheats?
Direct memory access is an ordinary PC feature. Graphics cards, NVMe drives and network cards all use it to move data in and out of RAM without bothering the CPU. DMA cheats use the same mechanism with a card built for reading, not for graphics or storage.
A normal cheat is software running on the same computer as the game, and anti-cheat runs on that computer too, so the two are always in the same room. DMA hacks move the cheat to a different computer. The card reads the game's memory and passes it along, and the cheat software, its overlay and its logic all live somewhere anti-cheat can't look.
02How a DMA setup fits together
- The card reads memoryThe DMA card sits in a PCIe slot in the gaming PC. It reads the game's memory straight from RAM, many times a second.
- Data goes to the second PCThe card streams what it reads over USB to the second computer, where the cheat runs. This machine does all the work: finding players, working out angles, drawing the ESP.
- The picture comes backThe ESP shows up on the second PC's monitor. If you'd rather see it on your main screen, a fuser overlays the second PC's picture onto your gaming PC's video signal, after the gaming PC has drawn its frame.
- Aim goes back through a KMBOXTo move your crosshair, the second PC tells a KMBOX, which sits between your mouse and the gaming PC. The game sees ordinary mouse movement.
03DMA cheat hardware
The card
Almost every DMA cheat card is an FPGA board, a chip that can be programmed to act like other hardware. You'll see boards named after the FPGA size: 35T, 75T, 100T. Bigger chips read faster and leave more room for firmware tricks. For a game like CS2 a 35T is enough to play on. 75T and up is nicer.
The second PC
It only runs the cheat and maybe a radar window, so it doesn't need much. An old laptop works. A free USB port is the one real requirement.
KMBOX
Only needed if you want the cheat to touch your aim: aimbot, triggerbot, recoil control. ESP and radar work without it.
Fuser
Optional. Without one you look at a second monitor for the ESP, which is fine for radar and awkward for wallhacks. With one, it all shows on your main screen and stays out of any recording made on the gaming PC.
04DMA firmware, and why it decides everything
Every PCIe device tells the system what it is: a vendor, a device ID, a set of capabilities. Out of the box, a DMA card announces itself as an FPGA development board, and no gaming PC has a good reason to own one of those. Anti-cheats that take DMA seriously list the PCIe devices in your system and look for exactly that.
Custom firmware makes the card present itself as something ordinary, like a network or sound card, down to how it answers when the system talks to it. Cheap firmware copies a few IDs. Good firmware holds up when an anti-cheat pokes at the device to see if it's real.
- Standard firmware is enough for Valve matchmaking, where VAC doesn't inspect PCIe devices closely.
- FACEIT-grade firmware is built to survive FACEIT's kernel anti-cheat, which does. It's sold in our store.
- Firmware is flashed once. It only needs replacing if an anti-cheat starts recognising it.
05DMA cheats vs software cheats
Here's how DMA compares with the two kinds of software cheat, using our own CS2 builds as the example.
| Internalinjected DLL | ExternalLethality External | DMALethality DMA | |
|---|---|---|---|
| Where it runs | Inside cs2.exe | Its own process on your PC | A second computer |
| How it reads the game | Code injected into the game | Reads memory from outside, writes nothing | A PCIe card copies RAM over the bus |
| Extra hardware | None | None | DMA card, second PC, KMBOX for aim |
| Setup | Minutes | A few minutes | About 15 minutes once the card is in |
| Anti-cheat exposure | High | Low | Lowest |
| FACEIT | No | No | With FACEIT-grade firmware |
| Lethality price | We don't sell one | From €7 / month | From €7 / month |
06The downsides nobody puts on the box
You buy hardware first
Card, firmware and a KMBOX cost more than a year of most cheat subscriptions, before you've played a game.
It's a project
Opening the PC, flashing firmware and running cables. Not hard, but not two clicks either.
The ESP isn't on your screen by default
Without a fuser you're glancing at a second monitor. Fine for radar, clumsy for wallhacks.
It's not invisible
Anti-cheats keep getting better at checking PCIe devices. Your firmware is what stands between you and that.
If none of that puts you off, DMA is the safest way to cheat. If it does, an external CS2 cheat gets you the same features on one PC.
07DMA cheats FAQ
Are DMA cheats undetectable?
No cheat is. DMA removes the cheat from the gaming PC, which takes away almost everything anti-cheat normally looks for. What's left is the card itself, which is why firmware matters, and your behaviour in game.
How much does a DMA setup cost?
Budget for a DMA card, firmware, and a KMBOX if you want aimbot. You probably already own a second PC or laptop. The software is a subscription on top; ours starts at €7 a month.
Is a DMA cheat hard to set up?
Harder than running a loader, easier than it sounds. You install a card, flash firmware once and plug in a few cables. Plan on an evening the first time.
Which games do DMA cheats work with?
The hardware works with any game, because it just reads RAM. The software has to be written per game. Lethality's DMA build is for Counter-Strike 2: see CS2 DMA cheats.
Do DMA cheats lower FPS?
No. The cheat runs on another computer, so the gaming PC spends nothing on it. The card's reads go over the PCIe bus, which games don't come close to saturating.